Air
The Eazypod and the Eazypod Air are the same product. However, the Eazypod Air includes an Airpump 70 Kit.
How the EazyPod works
Water from the pond enters the EazyPod via the inlet and then flows around the circumference of the outer chamber of the EazyPod, passing through the stainless-steel grill causing many of the larger solids to be filtered out and settle in the base of the outer chamber. The EazyPod is incredibly simple to clean. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter. A 70 litre per minute air pump is recommended for use during the cycle cleaning. *Only EazyPodAir and EazyPod Complete models are supplied with a 70 litre per minute air pump and accessory kit.
Installing the EazyPod
PUMP-FED INSTALLATION
By this we mean that if your pump is going to be used to supply the water to the filter, and the filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).
GRAVITY-FED INSTALLATION
*User modification is required on the EazyPod to enable Gravity Fed installation. By this we mean that your pump is going to be used to return the filtered water to the pond and therefore your filter will be supplied by gravity via a larger diameter pipe. In this situation the water level in the filter will be at the same level as the pond.
 
How the EazyPod Complete works
Water from the pond enters the EazyPod Complete via the inlet, cascading around the 18 Watt UV-C bulbs, where any algae will be exposed to the UV-C radiation.
The water then flows around the circumference of the outer chamber of the EazyPod Complete, passing through the stainless-steel grill causing many of the larger solids to be filtered out and settle in the base of the outer chamber. This is the first stage of mechanical filtration.
As water enters the central chamber, through the stainless-steel grill, the fine smaller solids become trapped in the mass of K1 Micro. Biofilms build up on the protected surface area within each piece of media, allowing biological filtration to take place.
After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe and flows back to the pond via the outlet.
The EazyPod Complete is incredibly simple to clean. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter.
All EazyPod Complete models are supplied with a 70 litre per minute air pump and accessory kit.
Installing the EazyPod Complete
Water from the pond enters the EazyPod Complete via the inlet, cascading around the 18 Watt UV-C bulb, where any algae will be exposed to the UV-C radiation.The water then flows around the circumference of the outer chamber of the EazyPod Complete, passing through the stainless-steel grill causing many of the larger solids to be filtered out and settle in the base of the outer chamber. This is the first stage of mechanical filtration.As water enters the central chamber, through the stainless-steel grill, the fine smaller solids become trapped in the mass of K1 Micro. Biofilms build up on the protected surface area within each piece of media, allowing biological filtration to take place.After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe and flows back to the pond via the outlet.The EazyPod Complete is incredibly simple to clean. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter.All EazyPod Complete models are supplied with a 70 litre per minute air pump and accessory kit. 
Installing the EazyPod Complete
PUMP-FED INSTALLATION ONLY 
Dimensions
How the EazyPod Automatic works
The concept of the EazyPod Automatic is simple and yet innovative. Water enters via the inlet andpasses over an 18 watt UV Clarifying bulb (on UV versions), helping to kill any single celled algaein the water.The water then enters the outer chamber, which runs around the entire circumference of theEazyPod. Between the outer chamber and the inner chamber, there is a stainless steel perforatedscreen. These perforations are situated in the lower half of the screen and around its entire face.This means that when the water passes from the outer to inner chamber,a downward and upward flow is created. This causes many of the larger solids to settle in the baseof the outer chamber, due to the force of gravity.The size of the perforations will not allow large mechanical waste to enter the inner chamber,thus acting as a first stage mechanical filter. The inner chamber holds 18 litres of static K1 Micromedia. As the water enters the inner chamber, the fine smaller solids become entrapped in the K1Micro. After passing through the K1 Micro, the clean water then rises and overflows into the innerreturn pipe. From here it returns to the pond via the return outlet.The EazyPod Automatic filtration system gives water quality and clarity that surpasses allexpectations. The nature and volume of the K1 Micro means, that when static, apart from beinga very efficient mechanical filter, there is more than enough surface area for beneficial bacteria tocolonise. Therefore on a smaller pond, the EazyPod Automatic is an excellent complete filter.
Installing the EazyPod Automatic
PUMP-FED INSTALLATION ONLY
By this we mean that if your pump is going to be used to supply the water to the filter, and thefiltered water then returns back into your pond via gravity, i.e. down a waterfall, or through a largediameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).
Cleaning Cycle
The EazyPod Automatic will run a cleaning cycle which lasts approximately 6 and a half minutes.